Installation

Due to its compact construction, the Bio-Sol boiler is smaller than equivalent solutions with a separate accumulator tank and boiler.

Even so, it can be tricky to get the boiler to the boiler room, and it could even be necessary to partially dismantle the boiler to get it though doors/openings. That is why we have made the insulation easy to disassemble. At its thinnest point and without insulation, the boiler is 75 cm wide. With insulation, it is almost 1 m wide.

-----------------------------------------------------------------------------------------------------------------

Installation 1   Installation 2

The insulation comes in three parts: two halves and a cap.

-----------------------------------------------------------------------------------------------------------------

Installation 3   Installation 4

Installation 5   Installation 6

During assembly, we used a fastening strap to fasten the two halves. Place the shield behind the fastening ratchet  and lock the halves together with the plate band at the bottom and the plate unit around the boiler body, at the top. Finally, position the cap and lock it with the butterfly nut.

-----------------------------------------------------------------------------------------------------------------

Installation 7

If the boiler can be brought inside upright, one good method is to roll it in on pipes (similar to how the Vikings moved their boats over land).

-----------------------------------------------------------------------------------------------------------------

Installation 8

Should you need to detach the hatch, it is easier to re-attach it if you mark the height of the hinges first.

-----------------------------------------------------------------------------------------------------------------

Stocksbro Energi AB     SE - 783 92 Stora Skedvi     Tel +46 225 - 633 70     Fax +46 225 - 633 71
Expose 2010